ELECTRO-MECHANICAL CLOSERS LCN

LCN Sentronic Applications

This floor plan of a health care facility shows typical doorways controlled by Sentronic Closer/Holders.

Doorway 1:
Double egress doors. Push Side mounted 4110-SED and 4110SEC recommended. SED detector simultaneously releases both hold-open units when particle of combustions are present. When ceiling dectors are specified, 4110-SE can be used on both doors.

Doorway 2:
Single patient room door controlled by a 4310-MED. Door closes automatically when built-in detector senses particles of combustion. Door will hold-open at any position up to 160 degree opening. When ceiling detectors are specified, use 4310-ME. * Swing Free Arm is standard and ideal for this type of patient room door. Specify 4310 ME-SF, or 4310 MED-SF.

* May be required by local codes

Single Point - Will hold door open in 1 position

SED - Single Point Electronic with Detector
SED - Single Point Electronic without Detector
(Companion Unit)
SE- Single Point Electronic without Detector

 Doorway 3:
Single office door controlled by a 4010 SED. Door closes automatically when built-in detector senses particles of combustion. Door will hold-open at a selected position from 85 degree to 110 degree.

Doorway 4:
A pair of doors, 4310-MED and 4310-MEC selected for 160 degree hold-open. When MED built-in detector senses particles of combustion, hold open mechanisms in MED and MEC are released simultaneously permitting doors to close. When ceiling detectors are specified 4310-ME can be used on both doors. Double lever arm models for extra latching power would mount on opposite side of opening.

Multi-Point - Will hold door open in any position.

MED-Multi-Point Electronic with Detector
MEC-Multi Point Electronic without Detector
(Companion Unit)
ME - Point Electronic without Detector

 

Sentronic 4010 SED Pull Side

4110 SED Push Side

Heavy duty, Closer/Holder designed to hold open a corridor door. When ever current is interrupted, hold-open a corridor door. When ever current is interrupted, hold-open releases and door closes. Listed by UL for use with smoke barrier or labeled fire doors.

Can be pushed safely and easily into and out of hold-open.

Telescope adjustment in lever arm locates hold-open at points from 85º to 110º in 3º increments.

Functions as full rack and pinion hydraulic door closer when hold-open is not engaged.

Adjustable hydraulic back check cushions opening swing of door (floor or wall stops must be used)

Particulars
Intended for use with doors hung on hinges. For pivots, gear hinges, and swing clear hinges special templating required.
Maximum butt size 5"
Handed not field reversible.

Can be used in conjuction with new or existing electronic signaling or monitoring equipment

One SED unit controls one 24V SE or SEC as companion on a pair of doors.

Minimum opening width:

4010 Single door 2'10"
  Pair of doors 5'10"

 

Model Mounting Door Size
4013 Pull Side 34" - 38"
4014 Pull Side 38" - 48"
4113 Push Side 34" - 48"
4114 Push Side 38" - 48"

 

Finishes
AL Aluminum
KPD DARK
TAN
STAT
BRASS		 SED - Single Point Electronic with Detector
SEC - Single Point Electronic without Detector
(Companion Unit)
SE - Single Point Electronic without Detector

Closer Unit Available 24 or 120V AC/DC
Detector Available 24V AC/DC Only.

4310 MED Pull Side

 

4410 MED Push Side

Model Mounting Door Size
4313 Pull Side 34" - 38"
4314 Pull Side 38" - 48"
4413 Push Side 34" - 48"
4414 Push Side 38" - 48"

 

Finishes
AL Aluminum
KPD DARK
TAN
STAT
BRASS

MED-Multi Point Electronic with Detector
MEC-Multi Point Electronic without Detector
(Companion Unit)
ME - Point Electronic without Detector

Closer Unit Available 24 or 120V AC/DC
Detector Available 24V AC/DC Only.

 

Send mail to info@greatlakesaqp.com with questions or comments about this web site.
Copyright © 1997 American Quality Products.
Site development by Shing Chen.