PUSH & PULL BARS ROCKWOOD

Door Pulls

Pulls mounted on Pull side of non-latching door. Shown below are the most common sizes.
These pulls are available in all architectural finishes. Base plates may be required for mounting pulls on wood doors.
2 base plates are required for each pull. Note: Special sizes are available on request.

No. Material CTC Overall Projection Clearance Base
102 5/8" diameter 5 1/2" 6 1/8" 2 1 3/8" 5/8"
105 3/4" diameter 5 1/2" 6 1/4" 2 1/4" 1 1/2" 3/4"
106 3/4" diameter 6" 6 3/4" 2 1/4" 1 1/2" 3/4"
107 3/4" diameter 8" 8 3/4" 2 1/4" 1 1/2" 3/4"
108 3/4" diameter 10" 10 3/4" 2 1/4" 1 1/2" 3/4"
110 1" diameter 8" 9" 3" 2" 1"
111 1" diameter 10" 11" 3" 2" 1"
112 1" diameter 12" 13" 3" 2" 1"
118 1" diameter 18" 19" 3" 2" 1"

Cast Door Pulls

Heavy duty high quality casted or forged pulls, to be surface mounted for easy installation.

No. CTC Overall Projection Clearance Base Weight
131 --- 7 1/2" 2 1/4" 1 1/2" 2" 1.1 lbs.
139 --- 9 1/2" 2 3/8" 1 1/2" 2" 1.1 lbs.

Finishes 3, 4, 10, 10B, 26, 26D

Offset Door Pulls

 Can be made any size on special order and available in All finishes. On wood doors it is recommended that a base plate be specified to prevent the base of the pull from cutting into the door. For high abuse areas, specify heavy duty 3/8" - 16 thru bolts. (1/4" - 20 standard)

Finishes 3, 4, 10, 10B, 26, 26D, 32D

 

No. Material CTC Overall Projection Clearance Offset Base
150 3/4" diameter 8" 8 3/4" 2 1/2" 1 3/4" 3" 3 /4"
151 3/4" diameter 10" 10 3/4" 2 1/2" 1 3/4" 3" 3/4"
152 3/4" diameter 12 3/4" 2 1/2" 1 3/4" 3" 3" 3/4"
156 1" diameter 8" 9" 2 3/4" 1 3/4" 4" 1"
157 1" diameter 10" 11" 2 3/4" 1 3/4" 4" 1"
158 1" diameter 12" 13" 2 3/4" 1 3/4" 4" 1"
159 1" diameter 18" 19" 2 3/4" 1 3/4" 4" 1"
160 3/4" diameter 8" 8 3/4" 2 1/2" 1 3/4" 2 1/4" 3/4"
161 3/4" diameter 10" 10 3/4" 2 1/2" 1 3/4" 2 1/4" 3/4"
162 3/4" diameter 12" 12 3/4" 2 1/2" 1 3/4" 2 1/4" 3/4"
166 1" diameter 8" 9" 2 3/4" 1 3/4" 2 3/4" 1"
167 1" diameter 10" 11" 2 3/4" 1 3/4" 2 3/4" 1"
168 1" diameter 12" 13" 2 3/4" 1 3/4" 2 3/4" 1"
169 1" diameter 18" 19" 2 3/4" 1 3/4" 2 3/4" 1"

 

Push and Pull Bar Sets

#31 through #36 are available in all architectural finishes and are made to order for your door size. #37 through #39 are standardly made 36" overall and the 1" square tubing can be cut down in the field to fit your door.
The end brackets simply slip on to provide a secure fit over the tubing. #37 through #39 are not available in stainless steel.

31, 32

37

33, 34

38 (Single Bar)

 

No. Material Base Projection Clearance Space
31 3/8" x 1 1/4" 2" x 12" x 1/8" 2" 1 5/8" 8
32 3/8" x 1 1/2" 2" x 12" x 1/8" 2" 1 5/8" 8
33 3/8" x 1 1/4" 2" x 12" x 1/8" 1 5/8" 1 1/4" 8
34 3/8" x 1 1/2" 2" x 12" x 1/8" 1 5/8" 1 5/8" 8
35 set consists of 1 #31 and 1 #33       8
36 set consists of 1 #32 and 1 #34       8
37 1" sq. tubing 2 3/8" x 1 5/8" 2" 1 1/4" 8
38 1" sq. tubing 2 3/8" x 1 5/8" 1 5/8" 1/2" -
39 set consists of 1 #37 and 2 #38       8

Finishes 3, 4, 10, 10B, 26, 26D, 32D

Series 47 Push and Pull Bars

Series 47 push and pull bar sets are comtemporary designs manufactured in all architectural finishes. Standard mounting hardware is available for wood, metal, and glass doors. Series 47 is standardly manufactured from 1" diameter solid bar stock. It is also available in 3/4" diameter. Engraving "PUSH" or "PULL" is available as an option.

11047 - 11847

15647 - 15947

 

Pull No. CTC Offset Projection Clearance Push CTC Projection Clearance
11047 8 --- 3" 2" Specify 2 1/4" 1 1/4"
11147 10 --- 3" 2" Specify 2 1/4" 1 1/4"
11247 12 --- 3" 2" Specify 2 1/4" 1 1/4"
11847 18 --- 3" 2" Specify 2 1/4" 1 1/4"
15647 8 3 1/2" 2 3/4" 1 3/4" Specify 2 1/4" 1 1/4"
15747 10 3 1/2" 2 3/4" 1 3/4" Specify 2 1/4" 1 1/4"
15847 12 3 1/2" 2 3/4" 1 3/4" Specify 2 1/4" 1 1/4"
15947 18 3 1/2" 2 3/4" 1 3/4" Specify 2 1/4" 1 1/4"

Finishes 3, 4, 10, 10B, 26, 26D, 32D

Push and Pull Bars

Screen door guards #40, #41, and #42 may be used as such or as light duty decorative push bars, mounting only. Order screen door guards to your specific size or 36" and cut the tubing to fit at the job site.
The #50 series push and pull bars are made with cast slip-on end brackets and solid 1" rod for great strength and durability. Specify, Thru Bolt, Wood Screws, or Machine Screw, mounting.

No. Material Base Projection Clearance Space
40 5/8" tube 5/8" x 8 1/2" 1 1/8" 3/8" 2 1/2"
41 5/8" tube 5/8" x 6" 1 1/8" 3/8" 2 1/2"
42 5/8" tube 5/8" x 3" 1 1/8" 3/8" -
50 1" round 2" dia. 3" 2 5/8" 7 1/2"
51 1" round 2" dia. 2 3/8" 1 1/4" -
52 set consists of 1 #50 and 2 #51        

Finishes 3, 4, 10, 10B, 26, 26D

Cylinder Pull/Hospital Arm Pulls/Tapered Door Pulls

No Size Opening Depth
90 2" x 3 3/4" 1 1/4 dia. ---

 

No. Material CTC Overall Projection Clearance Base
190 1/2" x 3/4" 5" 8 1/4" 3 1/2" 2" ---
191 3/4" dia. 5" 8 1/4" 3 1/2" 2" 3/4"
192 cast --- 5 1/4" 4" 3 1/2" 1 5/8" x 3"
193 cast --- 9 1/4" 3 1/2" 1 5/8" 1 1/2" x 1 1/2"

Finishes 3, 4, 10, 10B, 26, 26D, 32D

Flush Pulls

These pulls are available in most architectural finishes so they may be used in both institutional as well as high design situations. #95A through #95C as well as #94C are concealed mounted by screws in the side wall of the recess cup area.
For high security areas, the #94 Series is available with spanner, tamperproof torx or security socket machine screws.
Please specify fastener requirements when ordering.

Finishes 3, 4, 10, 10B, 26, 26D, 32D

No. Size Opening Material Depth
95A 1 15/16" x 3" 29/32" x 2 1/2" cast 3/4"
95B 2 1/2" x 4" 1 7/16" x 3 1/2" cast 3/4"
95 2 3/4" x 3 7/8" 1 1/8" x 2 5/16" wrought 3/4"
95C 2 3/4" x 3 7/8" 1 1/8" x 2 5/16" wrought 3/4"
94 3 1/2" x 5" 1 3/4" x 3 1/8" wrought 7/8"
94C 3 1/2" x 5" 1 3/4" x 3 1/8" wrought 7/8"

 

Send mail to info@greatlakesaqp.com with questions or comments about this web site.
Copyright © 1997 American Quality Products.
Site development by Shing Chen.