American Quality Products - Rockwood Push & Pull Plates

PUSH & PULL PLATES	ROCKWOOD

Pull Plates

Mounted on pull side of a non-latching door. Shown below are the most common sizes.
These pull plates are available in all architectural finishes.

Note: Special sizes are available on request.

No.	Pull	CTC*	Plate	Size
110X70B	1" diameter	8"	70	3 1/2" x 15"
110X70C	1" diameter	8"	70	4" x 16"
111X70B	1" diameter	10"	70	3 1/2" x 15"
111X70C	1" diameter	10"	70	4" x 16"
122X85	3/8" x 1 1/4"	6"	85	3 1/2" x 15"
123X85	3/8" x 1 1/4"	8"	85	3 1/2" x 15"
132X70B	cast	5 1/2"	70	3 1/2" x 15"
132X70C	cast	5 1/2"	70	4" x 16"
132X85	cast	5 1/2"	85	3 1/2" x 15"

* Center to Center

Finishes 3, 4, 10, 10B, 26, 26D, 32D

Push Plates

Push plates are available in all architectural finishes, clear plastic and Westinghouse Micarta laminate plastic. The most popular variations and sizes are shown on this page, but any size may be obtained by special order. Push plates are supplied with phillips oval head stainless steel sheet metal screws, plated to match. #70, #71 and #72 have four beveled edges. Shown below are the most common sizes in .50 wrought thickness.

Options

Adhesive mounting. Specify push plate number "x scotch mount." The push plate will have a 1/16" thick double face foam tape applied to the back side and will have no screw holes.

Engraving. On plates 4" wide or wider it is possible to engrave "PUSH", "PULL", "MEN" or "WOMEN". Please indicate the copy you require.

Cylinder and turn knob cutouts. Specify the push plate number "x C/C" for cut cylinder and "x C/TK" for cut for turn knob.

Finishes 3, 4, 10, 10B, 26, 26D, 32D

No.	Thickness
70	.050 wrought
71	.062 wrought
73	.125 wrought
74	.188 wrought
75	.125 plastic

Standard Sizes
B	3 1/2 X 15
C	4 X 16
E	6 X 16
F	8 X 16

Suffix for End Modifications

RC = rounded corners
RE = rounded ends